Blinking, Flashing and Temporal Response

Use the category links below to navigate this web site. All site pages can also be accessed with the site map.

Design Process

Color Graphics Topics

Color Tool

Color Guidelines

Aerospace

Color Science

Utilities

Site Map

BLINKING, FLASHING, AND TEMPORAL RESPONSE
On This Page: • Parameters of Temporal Modulation • Demonstrations

** Caution: The demonstrations below display flashing symbols.
Flashing symbols may cause seizures in users with photosensitive epilepsy. **
You can also view this page without the flashing symbols.

Temporal modulation (blinking, flashing) is a very powerful tool for drawing attention. This, along with auditory alerts, is the heavy artillery of attention manipulation and must be used only when absolutely necessary. As commercial website designers know it is almost impossible to ignore large, flashing graphics in peripheral vision, even to the point that it interferes with reading the non-flashing main content. The most powerful types of temporal modulation should therefore be used only for hazards, i.e., for data that require immediate user action.

Blinking and flashing are not all-or-nothing, though. The salience of a flashing element can be manipulated over a wide range by varying the parameters of the temporal modulation. At the powerful end of the scale flashing elements interfere with attention to all other data elements. At the weak end of the scale they can be barely noticeable. The auditory analogues of the stronger types of flashing are sirens and klaxons. At the weaker end are confirmatory sounds like the clicking of an car's turn signal.

Non-Temporal Parameters Influence Flashing

The salience of a flashing element is influenced by the non-temporal parameters of the element such as size, shape, color, luminance, and position in the field of view. Those aspects of the graphics are usually dictated by design considerations other than salience. Once those variables are fixed, the salience of flashing will be governed by the parameters of the temporal modulation.

Parameters of Temporal Modulation

Graph showing the luminance maximum and minimum of a blinking stimulus over time.

The temporal frequency, f, and the contrast, C, have strong effects on the attention demand. The temporal frequency is the number of flashes per unit of time. The contrast is the difference between the luminance of the bright and dark phases of the flashing (relative to twice the average luminance).

Temporal Frequency. The rate of flashing has a powerful influence on the salience of flashing elements. The human eye is most sensitive to frequencies of 4-8 Hz (cycles/second). Very slow and very fast blinking are less attention-demanding than rates near that peak.

Graph that shows the luminance of 3 different blinking stimuli over time. The stimuli vary in luminance variance and in temporal modulation.

The stimulus graphed in b flashes faster (higher f) than the one in a. The stimulus in c has a lower depth of modulation (lower C) than the one in a.

Contrast, Depth-of-Modulation. The change in luminance between the peak and trough of the modulation also has a strong influence on the demand on the users' attention. The graphic element will have maximum salience if it goes from maximum luminance to minimum luminance in a cycle, at a frequency of 4-8 Hz. On the other hand, if the luminance contrast of the data element is low the blinking may be barely noticeable.

Duty Cycle . All of the above waveforms have a 50% duty-cycle, i.e., the on-state occupies 50% of each cycle. Increasing the duty-cycle can reduce the salience of the blinking.

Graph displays luminance changes of 2 blinking stimli. A higher duty cycle is displayed as a stimulus with greater time periods of higher luminance.

In a the duty-cycle is 50%. In b the duty-cycle has been increased to 88%.

Related Psychophysical Results

The vast majority of studies of perception of temporally modulated lights involve measurement of contrast thresholds, the minimum contrast that can be seen to be flickering. Generally speaking, for stimulus lights of the luminances that occur in electronic displays, a plot of threshold C as a function of f shows a minimum (i.e., maximum sensitivity to the temporal modulation) at 10-20 Hz. Even maximum-contrast modulation is undetectable at frequencies above about 60 Hz.

These threshold experiments are not directly relevant to our primary concern, manipulation of salience, which is about attention rather than detection and suprathreshold flicker rather than threshold flicker. Much less research has been devoted to temporal modulation for salience and most of that is not easily generalized beyond the exact type of stimulus used in the study.

Demonstrations

** Caution: The demonstrations below display flashing symbols.
Flashing symbols may cause seizures in users with photosensitive epilepsy. **

Remove Flashing Demonstrations

A 4 hertz flashing text and symbol on a grey bakcground. The higher duty cycle conveys higher urgency.

Temporal Frequency. The 4-Hz flashing symbol and text (left panel) draw attention more insistently than the 1-Hz flashing symbol and text (right panel). At frequencies below 1-Hz it may be best to avoid total disappearance during the off-interval by turning the graphics only partially off (see next demonstration).

A 1 hertz flashing text and symbol on a grey bakcground. The lower duty cycle conveys lower urgency.

Contrast, Depth-of-Modulation. The salience of the flashing can be reduced by reducing the contrast of the modulation. In this panel the parameters are all identical to those in the right panel above, except the luminance in the off-interval is only slightly reduced rather than turned completely off.

A low salience blinking demonstration. The blinking text and symbol change only lsightly in contrast.

A clinking stimuls with a higher duty cycle. The stimulus appears for a slightly extended interval. The result is a less urgent stimulus.

Duty Cycle . All of the above demonstrations have a 50% duty-cycle. In the left panel the duty-cycle has been increased to 88%.

Legibility of Flashing Text. Temporal modulation of alphanumeric information requires careful attention to legibility, color discrimination and identification, and impact on the overall salience hierarchy of the display.

A 27-word block of text blinking on and off at 2 Hz. The sentences are hard to read.

Large Text Blocks. Temporal modulation of large text blocks can reduce legibility. The example at left flashes at 2 Hz, with 100% modulation.

A block of text blinking on and part-way off at 2 Hz. The sentences are easier to read.

Reduced Modulation Depth. Reducing the depth of modulation leaves the text visible in the "off" state.

A red triangle blinking on and off at 2 Hz next to a continuously-presented block of text. The triangle draws attention to the highly legible text.

Flashing Symbol. Another way to draw attention to a large block of text that must be read is to flash an adjacent symbol and leave the text on continuously.